Tony Esola

Ball Peen: 1-3/4 in length, sterling silver head, reclaimed maple handle

 All wood handles are individually hand shaped and installed with a silver wedge in the head.

Carpenter Hammer: 1-3/4"in length, sterling silver head & wedge, reclaimed maple handle

All wood handles are individually hand shaped and installed with a silver wedge in the head.

This sterling silver handsaw is assembled with reclaimed maple and brass rivets.

Dimensions:  1-3/4"L, 3/4"H

All woodsaws are constructed with dual tac pins and stamped "Sterling" and with personal benchmark. The reclaimed maple handles are assembled with brass rivets.

All standard hadsaws come with custom branch pattern branded on the front and back of each handle.

These saw pins make great hat pins as well as lapel or tie pins

The light color is mor common of newer saws.

Dimensions: 1-3/4"L, 3/4"H

All woodsaws are constructed with dual tac pins and stamped "Sterling" and with personal benchmark. The reclaimed maple handles are assembled with brass rivets.

All standard hadsaws come with custom branch pattern branded on the front and back of each handle.



These saw pins make great hat pins as well as lapel or tie pins

All backsaws are construced dual tac pins on strerling silver(brass spine). The handles are reclaimed maple and assembled with brass rivets. The back of each saw is stamped "sterling" and with personal bench mark.

These saw pins make great hat pins as well as lapel or tie pins

Dimensions: 2'L, 1/2"H

Dimensions: 2'L, 1/2"H

All backsaws are construced dual tac pins on strerling silver9brass spine). The handles are reclaimed maple and assembled with brass rivets. The back of each saw is stamped "sterling" and with personal bench mark.

These saw pins make great hat pins as well as lapel or tie pins

Dimensions: 2'L, 1/2"H



Dimensions: 2'L, 1/2"H

Relative to the backsaw, this stairsaw is not as well known.

It too is constructed with steling silver, brass spine, brass thumb screws and assembled withbrass rivets on a reclaimed maple handle(cherry stain).

Dimensions: 2'L, 5/8"H

Axe: 2-1/2"L, sterling silver head & wedge, maple handle

Log: 1-1/2"D, 1"H, unknown reclaimed wood.

This axe looks as if it were chopped in to the log while being displayed as well as being chopped into the garment while being worn.

All wood handles are individually hand shaped and installed with a silver wedge in the head.

This axe is constructed with a sterling silver head, reclaimed maple handle and assembled with maple and silver wedges. While not in use, the axe pin sits as though it were struck into its miniature stump.

Axe: 2-1/2"L

Log: 1-1/2"D, 1"H, unknown reclaimed wood.

The handle is hand shaped from reclaimed maple and installed with both a maple and silver wedge in the head of the axe.

The log is cut from an unknown reclaimed wood branch.

The handle is hand shaped from reclaimed maple and installed with both a maple and silver wedge in the head of the axe.

The log is cut from an unknown reclaimed wood branch.

The pin clutch is stored inside the log while not on the pin.

The axe looks as though it were chopped into the hat while being worn.

The axe looks as though it were chopped into the hat while being worn.

Chasing Hammer: 1-3/4" in length, sterling silver head & wedge, reclaimed maple handle with a cherry stain. 

Planishing Hammer: 1-3/4" in length, sterling silver head & wedge, maple handle with a cherry stain.

Both frames are equipped with an actual 8/0 blade, making them functional. 

Saw Frames: Small=1-3/4"H, 3/4"W, Large=1-3/4"H, 2-1/2"W, sterling silver, maple handle, cherry stain

This set was constructed especially for a pin auction benefiting the Yuma Arts Symposium

The fly pin was originally created for an annual arts symposium in Yuma AZ. Equipped with jewelers saw and safety glasses, this fly is ready for the "Saw, File, Solder Sprints"

About a hundred of these have been released in Yuma at the annual art symposium pin swap.

Constructed from sterling silver, this lapel pin was a custom order. A friend of mine was looking for the perfect gift for an ice cream fanatic friend of thiers, so I made this completely funtional, actuating thumb lever, miniature scooper lapel pin.

The thumb lever actuates a gear driven scoop releaser.

Materials: sterling silver, brass, steel, maple

Dimensions: 1-3/8"L, 3/8"W (bowl diameter, 3/8")



Barely large enough to hold on to, this miniture scooper is one of my favorite pins that I have ever made. I hope to put this one in to production.